自动校准中心气动针状夹具 PT
• 4根(PT25)或者8根(PT28)直径2mm的针。
• 适合塑料、纺织或食品工业。
• 双动作。
• 瞬时调整针行程 (1)。
• 多个安装附件 (2)。
• PT25: 大通孔 (3)。
• PT28: 用于清洁和释放的排放口 (T)。
• PT28: 用于接触热表面的PTFE 垫 (4) 。
• PT28: 选装磁性传感器 (5)。
Self-centering pneumatic needle gripper series PT
• 4 needles (PT25) or 8 needles (PT28) with 2mm diameter.
• Suitable for p1astics, textile and food industry.
• Double acting.
• Needle simultaneous stroke adjustment (1).
• Several mounting accessories (2).
• PT25: Large through hole (3).
• PT28: Blow-off port (T) for cleaning and releasing.
• PT28: Pad in PTFE (4) for hot surface contact.
• PT28: Optional magnetic sensors (5).
带有 3 个颚式钳的自动定心气动抓持器(SXT 系列)
•双动作 (可按需关闭)。
•高夹紧力。
•防护等级为IP67。
•列柱向上采用双层O型圈设计。
•适用于恶劣的环境。
•可选的磁传感器。
•FDA-H1 食品级润滑脂。
•Double acting (normally closed on request).
•Strong gripping force.
•Protection class: IP67.
•Double O-Ring sealing on the columns.
•Suitable for harsh environments.
•Optional magnetic sensors.
•FDA-H1 food-grade grease.
介质压缩空气符合 ISO 8573-1:2010 [7:4:4]
GIMATIC是一家为工业自动化提供气动、电动夹具(尤其是整套EOAT解决方案)的制造商,产品销量多年来在欧洲乃至全i球范围内都很领i先,在夹具制造业拥有世界i领i先水平的技术
传感器
磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此,大量的磁性材料和强烈的磁场可能会造成传感问题。
The operating position is detected by proximity magnetic sensors
(optional) through a magnet p1aced on the piston.
Therefore, avoid using the gripper in the vicinity of intense
magnetic ffelds or near a large mass of ferromagnetic material
as this may cause detection errors.
以上信息由专业从事夹具快速切换器的吉玛泰克于2024/3/25 10:25:42发布
转载请注明来源:http://tonghua.mf1288.com/jmtkzdh-2723730054.html
上一条:通化保温水箱询问报价「昌隆白钢」